PRODUCT INFORMATION
Usage Instructions
📝 How to Use:
Key Features
✅ Removes Stubborn Grease & Burn Marks – Specially designed to break down years of baked-on grease, oil, and carbon buildup on ovens, grills, and rotisserie surfaces.
✅ Deep Cleaning for Kitchen Equipment – Perfect for restoring stainless steel and metal surfaces to their original shine by eliminating blackened, burnt stains.
✅ Safe & Non-Corrosive Formula – Tough on grime but gentle on equipment. Safe for most metal surfaces without causing corrosion or damage.
✅ Effortless Application – Simply apply the powder or spray, wait a few minutes, then wipe or rinse off—no hard scrubbing or complicated tools needed.
Step 1: Deep Clean with Atomic Ion Powder
– Dissolve the powder in hot water at the proper ratio (about 100g of powder per 500ml of water).
– Use a brush or cloth to apply the solution evenly onto areas with long-standing grease or burnt stains, such as ovens, grills, or cookware.
– Let it sit for 10–15 minutes to soften the grime.
– Then use a scraping tool to gently lift and remove loosened residue.
– Wipe clean with a cloth or rinse with water.
Step 2: Spray Cleaner & Protective Coating
– Spray the cleaning solution evenly onto the surface after the powder treatment.
– Wipe with a soft cloth to remove any remaining oil or grease.
– The spray leaves a protective layer that resists future buildup and makes future cleaning easier.
Note:
– The powder must be mixed with hot water for best results.
– Safe for use on metal and kitchen equipment.
– It is recommended to wear gloves during cleaning to protect your hands.